Utility guide

APS rate plans, solar export credits and batteries

APS serves homes and businesses in 11 of Arizona's 15 counties. If the name at the top of your electric bill is Arizona Public Service or APS, start here.

Reviewed November 5, 2026 against the sources listed at the bottom of this page.

This is general planning information for APS customers thinking about solar, a battery, or a different rate plan. It is not utility, engineering or tax advice. Rates and rules change, so confirm anything you rely on with APS.

Plans APS offers homes today

The plan you are on changes what solar and a battery can do for your bill. These are the residential plans on APS's Rates, Schedules and Adjustors page, using APS's own plan names.

  • Time-of-Use 4 PM to 7 PM weekdays (TOU-E). Energy costs the most on weekdays from 4 PM to 7 PM, year round. Weekends and APS's listed holidays are off-peak. Open to all residential customers, including homes with solar.
  • Time-of-Use 4 PM to 7 PM weekdays with Demand Charge (R-3). The same on-peak window, much lower energy prices per kWh, plus a monthly charge based on your single highest hour of usage during the 4 PM to 7 PM window. Open to homes with solar.
  • Winter super off-peak. TOU-E, R-3 and the EV plan all have their lowest energy rate from 10 AM to 3 PM on weekdays during the winter billing months (November through April bills), except on off-peak holidays.
  • EV Overnight (R-EV). For EV owners. The cheapest hours are 11 PM to 5 AM on weekdays, and the 4 PM to 7 PM peak is priced high.
  • Fixed Energy Charge (R-1). One energy price at any hour, in three usage tiers. R-1 is not available with rooftop solar, so a home that adds solar moves to a different plan. APS markets TOU-E and R-3 to new solar customers.
  • Saver Choice Plus (R-2). Closed to new customers since December 2021. Its on-peak window is 3 PM to 8 PM on weekdays and it has a demand charge. Customers already on it can generally stay, but leaving it is one-way.
  • Older solar plans (E-12, ET-1, ET-2, ECT-1R, ECT-2). Closed to new customers. Homes that went solar early may be grandfathered on one for up to 20 years from interconnection, and cannot move between them.

Your bill is more than the published rate

A plan's published price is only part of the bill. Every plan also has a daily basic service charge (about 46 cents a day on TOU-E, R-3 and R-EV in October 2026), per-kWh adjustors that added up to roughly 2.7 cents per kWh in October 2026, a small monthly environmental charge, and taxes and fees. Several of these reset every year. Homes with solar can also see a Grid Access Charge or a legacy charge.

On TOU-E, summer on-peak energy costs about 2.8 times the summer off-peak price. That gap is why when you use power matters as much as how much you use.

Sizing solar to make 100 percent of your yearly kWh does not make the bill zero. The fixed charges stay, and what you export earns the lower export credit instead of the retail price. That is why installers often plan above 100 percent, and why the export rate they used should be shown to you. Ask what share of the bill they expect the system to cover, and what that number assumes.

Taxes and fees depend on your city. On a real APS bill from a Chino Valley address, they added up to 12.84 percent of the charges. APS added a 0.25 percent regulatory assessment and a 2 percent franchise fee first, then state sales tax (5.6 percent), county (about 0.75 percent) and city (about 4 percent) on top of those. The tax was figured on the full charges, before the solar export credit came off. Other cities will be different.

If you have solar: the export credit

New residential solar customers are credited for the power they send to the grid through APS Rate Rider RCP. The 2026 rate is $0.05554 per kWh. It applies to customers who submit an interconnection application from September 1, 2026 through August 31, 2027. This comes from APS Rate Rider RCP, Revision 11, effective September 1, 2026.

That rate is locked for 10 years from the time your system is interconnected, as long as you finish installation and local approval within 180 days of the application (270 days if APS or a third party causes the delay). After 10 years the credit follows the rate in effect then, which can change from year to year. Rates for new customers have come down over time. Earlier years were higher, for example $0.12900 for customers who applied in 2017, and the tariff does not let the rate fall by more than 10 percent in a year.

APS meters exports on an instantaneous basis. Power you send out at noon does not cancel power you buy at 7 PM. The credit appears as a dollar amount on your monthly bill. Unused credit rolls to the next bill, and APS mails a check after the December bill if the leftover credit is more than $25.

The rider is for solar PV that is connected to the APS grid, installed on site behind your billing meter, and serving your own load. APS also requires an AMI meter.

Adding panels later can change a locked rate. Under the tariff, increasing capacity by 10 percent or 1 kW-ac, whichever is greater, ends the original locked rate, and credits then follow the current rate for the years that remain. Ask APS or your installer before you expand.

Homes that went solar before September 2017 may be on grandfathered net metering (Legacy EPR-6), which works differently. The RCP rider cannot be combined with a grandfathered legacy plan.

Costs that can still change

  • Grid Access Charge. The TOU-E, R-3 and R-2 sheets list a Grid Access Charge for homes with solar, billed per kW of solar installed. On a real APS bill from November 2025 it appeared as 5 kW at $0.25 per kW, or $1.25 for the month. News reports from June 2026 say the Arizona Court of Appeals struck the charge down because of how it was added. The APS tariff sheets still listed it when we checked in October 2026, and the matter is not settled. Ask how it is being billed.
  • Pending rate case. APS filed a general rate case in 2025 that the Arizona Corporation Commission has not decided. APS says it includes a higher Grid Access Charge for rooftop solar. The rates in this guide are the current rates and could change after the Commission votes.
  • Yearly resets. Several adjustors and the export rate reset on a schedule, so a number that is right today may not be right next year.

What a battery can and cannot change on these plans

  • On TOU-E and R-3, a battery can hold solar or off-peak energy and use it during the 4 PM to 7 PM on-peak hours, so you buy less from the grid at the highest price. How much depends on the battery size, how it is set up, and what your home runs at that hour.
  • On R-3, the demand charge follows your highest hour of usage during the on-peak window. A battery set up for those hours can lower that peak, but only if it is sized and programmed for it and the big loads (air conditioning, a well pump, an EV charger) are part of the plan.
  • Every kWh you use yourself avoids the full retail price. Every kWh you export earns the export credit, which is lower. A battery that moves solar into the evening can be worth more than the export credit it gives up, but whether that is true depends on your real hourly usage. Ask for it to be tested with your APS usage data.
  • Backup and bill management compete for the same battery. Energy held back for an outage is not available to cut a peak.

Questions to ask before you choose a plan or sign

  • Which APS plan am I on today, and which one will I be on after solar? R-1 is not available with solar.
  • Which plan and which export rate did the installer use in the numbers they showed me? Is the rate locked, and until when?
  • If I add panels later, what happens to my locked rate?
  • How is the Grid Access Charge being billed on my account?
  • Do my large loads run between 4 PM and 7 PM on weekdays?
  • Does the proposal show a bill under the plan I will really be on, with the battery set up the way I plan to use it?
  • Who handles the APS interconnection request, and how long does approval take?
  • Bring 12 months of APS bills. They show your real usage, your plan name, and your peak months.

How the AER planner treats your APS bill

The AER Hybrid and Grid-Tied Planner can take your average monthly APS bill and your rate plan and turn them into a range of yearly kilowatt-hours. It uses APS's published tariff rates, checked in October 2026, and assumes the bill has no rooftop solar on it. The range is wider for plans with a demand charge or heavy evening use, and it is widest if you are not sure which plan you are on.

If you can read your yearly kWh from your APS bill or online account, enter that instead. It is more accurate than working backward from dollars.

The planner does not calculate your bill under each plan, and it does not promise savings. It is a starting point for the conversation. Final numbers depend on a site visit and utility approval.

Sources

These are the pages we read for this guide.

Bring your bills and your questions.

AER can walk through your rate plan, your loads and what a system would and would not change. Final design depends on a site visit and utility approval.

All utility guides